User's Manual

Tally Dascom 2600/2610/PRN-7
5.2.4 Menu handling
You can navigate in the current menu using the four function and selection keys
arranged below the LC display field. Each function and parameter displayed in the LCD
is executed or selected by the corresponding key below, respectively. Usually two
parameter groups are combined at one level. In the following example, these are the
LPI and Skip parameter groups.
If you do not wish to change one of the two parameters you can either press the Next
key (to access the two following parameter groups in the menu), or you can press the
Back key (to access the two previous parameter groups in the menu).
If you want to change a setting, (e.g. the line density), then press the LPI key (LPI = lines
per inch) to access the actual parameter level.
The currently valid setting is marked by an asterisk (in the example below the
current setting is 6 lpi). With the < and > keys you can view the other parameters
available for
this setting.
Example:
Save settings
Once the desired parameter is displayed on the LC display, you can save it by pressing
the Set key. The parameter is then set and the printer automatically displays the
parameter groups again. With the Exit key you can leave the sublevel without saving
your changes.
32