User's Manual

Tally Dascom 2600/2610/PRN-7
4.2.2 Online mode
After switching on, the printer is automatically set to online mode.
Only in this mode can it receive data from the computer.
䕔㻌
O
nline key: Toggle between Online and Offline mode.
䕔㻌
T
ear key (4): Activates the tear function when fanfold
paper
is loaded.
If Load is displayed above this key, no paper is loaded
in the printer or the paper is in park position. In this case
the display switches between O
nline and Park Position.
Press the key to feed paper to the printing position.
䕔㻌
Setup key: Sets the printer to setup mode.
4.2.3 Offline mode
Only in this mode is it possible to perform step, line, or form feeds from the control
panel, however, data cannot be received.
䕔 P
ark key (1)
If fanfold paper is loaded in the printer, it is fed to the
park position or the tear position. If a single sheet is
loaded, it is ejected.
䕔㻌©
key (2)
Each press: Paper is transported upwards step by step.
Holding: Continuous transport upwards.
䕔㻌ª
key (3)
Each press: Paper is transported downwards step by
step.
Holding: Continuous transport downwards.
䕔㻌ª
LF/FF (4)
Paper in the printer:
Each press: performs a line feed (LF).
Holding: performs a form feed (FF).
䕔㻌L
oad key (4)
No paper in the printer: The press on this key loads the
paper to the first print position.
䕔㻌S
etup key: Sets the printer to setup mode.
䕔㻌O
nline key: Sets the printer to online mode.
24