User's Manual

Tally Dascom 2600/2610/PRN-7

䕺 Keys

1)ɋ

OnlineɌ

a) Every press on this switch toggles the status between Online and Offline. When the

printer is Online, it receives data from the host; while it is Offline, it stops the printing and

signals the host to stop sending data.

b) Press the keyɋ

OnlineɌfor the below operations:

z Before and after special setup: Most of the special setup requires Offline operation.

press on

OnlineɌkey brings the printer Offline to carry out the special setup; after

that, pressingɋ

OnlineɌbrings the printer back online.

z Halt the printing for error recovery: PressingɋOnlineɌbrings the printer Offline for

error recoveries like paper jam and so on. After the recovery, pressɋ

OnlineɌto

continue the printing.

2)ɋ

Load/EjectɌ

If paper is already loaded:

Single sheet - - > The printer ejects the paper;

Tractor front and rear - - > The printer moves the paper in to Park position.

If paper is not loaded:

Transport the paper to the first print position (TOF).

3)ɋSpeedɌ

Toggles between high speed and high quality print depending on menu settings.

4)ɋ

TearɌ

When fanfold stationery are installed in an active tractor path, a press of this key advances

the perforation of the stationery to the cutting edge of the tear-bar. This key is invalid for cut

sheets and Top Pull Tractor.