User's Manual

Tally Dascom 2600/2610/PRN-7

5) If you do not need to adjust the left margin go to the next step. Open the right and left

tractor flaps, insert fanfold paper into the left-hand tractor, and make sure that at least

three paper transport holes are positioned on the tractor pins, close the tractor flap,

open the latch lever and align the tractor so that the first printing position on the

paper matches the IIIIXIIII mark on the printer housing, then lock the lever again.

6) Align the right-hand tractor to the width of the paper and insert the paper (Make sure

that it is inserted by the same length as on the left-hand tractor in order to avoid any

paper jam). Then close the tractor flap and slide the tractor to the right until the paper

is slightly tensioned, then lock the tractor.

7) Lower the front cover, switch the printer on.

For LCD: The active paper source (T

rFront) appears in the display, the paper will

automatically load when the printer is in online mode and receives data from the

computer. Also, you can press the load key (k

ey 4) only to load paper before

starting the printout.

For LED: The paper will automatically load when the printer is in online mode and

receives data from the computer. Also, you can press the load key (k

ey 2) only to

load paper before starting the printout.