User's Manual

Tally Dascom 2600/2610/PRN-7
3 Installing the paper
The printer can handle either single sheets or continuous forms. The printer is able to
print up to 5 copies (original plus 5).
T
o ensure the print quality and protect the print head, set a proper print gap by
t
he gap lever (see 3.1) for the form thickness and do not load folded, damaged,
w
rinkled, or curled paper.
3.1 Adjusting the print gap for various form thicknesses
The print gap lever is on the left side of the printer inside the top cover.
Take care to adjust the print gap lever to a suitable position whenever you change the
number of copies being printed. Using the wrong print gap may cause print head
damage or paper jams.
The recommended gap lever position for different form thickness is:
Paper type
Lever position
1-part
1
Original + 1 copy
2
Original + 2 copies
3
Original + 3 copies
4
Original + 4 copies
5
Original + 5 copies
6
The position “Ribbon” only is suitable for loading the ribbon. When the lever is set
higher than appropriate it will result in poor print. The ribbon and head life will be
shortened.
10