User's Manual

Tally Dascom 2600/2610/PRN-7
2 Installation
2.1 Placing the printer
Place the printer on a solid, flat, stable surface such that the printer sits firmly and
cannot move. Select an environment with sufficient ventilation, easy access to the
control panel and paper input areas as well as the printed output.
When selecting the printer location, observe the following additional requirements:
1
) Never place the printer near to any flammable gas or explosive
s
ubstances.
2) Do not expose the printer to direct sunlight. If you cannot avoid
placing the printer near a window, protect it from the sunlight with a
c
urtain.
3
) When connecting a computer to the printer, make sure the maximum
r
ecommended cable length is not exceeded.
4) Ensure sufficient distance between the printer and any heating
d
evices/radiators.
5) Avoid exposing the printer to extreme temperature or air humidity
fluctuations. Above all, avoid dusty environments.
2.2 Connecting the printer
This printer is configured with a Parallel, USB and Ethernet interface as standard. An
optional Serial interface can be installed additionally.
5