User's Manual
T
ally Dascom 2610
18
ƹ
Keys
1)
ɋ
Online
Ɍ
a) Every press on this switch toggles the status between Online and Offline. When the printer is
Online, it receives data from the host; while it is Offline, it stops the printing and signals the host to
stop sending data.
b) Press the key
ɋ
Online
Ɍ
for the below operations:
z Before and after special setup: Most of the special setup requires Offline operation. A
press on
ɋ
Online
Ɍ
key brings the printer Offline to carry out the special setup; after that,
pressing
ɋ
Online
Ɍ
brings the printer back online.
z Halt the printing for error recovery: Pressing
ɋ
Online
Ɍ
brings the printer Offline for error
recoveries like paper jam and so on. After the recovery, press
ɋ
Online
Ɍ
to continue the
printing.
2)
ɋ
Load/Eject
Ɍ
If paper is already loaded:
Single sheet - - > The printer ejects the paper;
Tractor front and rear - - > The printer moves the paper in to Park position.
If paper is not loaded:
Transport the paper to the first print position (TOF).
3)
ɋ
Speed
Ɍ
Toggles between high speed and high quality print depending on menu settings.
4)
ɋ
Tear
Ɍ
When fanfold stationery are installed in an active tractor path, a press of this key advances the
perforation of the stationery to the cutting edge of the tear-bar. This key is invalid for cut sheets.