User's Manual
Table Of Contents
- About This Manual
- 1 PRODUCT OVERVIEW
- 2 SETUP
- 3 INSTALLING DRIVER
- 3 CONNECTING TO COMPUTER
- 4 SETTING/CHECKING MODES
- 5 SETTING DIP SWITCHES
- 6 TROUBLESHOOTING
- 7 SPECIFICATIONS
- 8 CHARACTER CODE PAGES
- 8.1 Common to All Pages (International Character Set: USA)
- 8.2 International Character Sets
- 8.3 [User-defined page]
- 8.4 [PC437: USA, Standard Europe]
- 8.5 [PC850: Multilingual]
- 8.6 [PC852: Latin2]
- 8.7 [PC858: Euro]
- 8.8 [PC860: Portuguese]
- 8.9 [PC863: Canadian-French]
- 8.10 [PC865: Nordic]
- 8.11 [PC866: Cyrillic #2]
- 8.12 [KU42: Thai]
- 8.13 [TIS11: Thai]
- 8.14 [TIS18: Thai]
- 8.15 [PC720: Arabic]
- 8.16 [PC864: Arabic]
- 8.17 [WPC1256: Arabic]
- 9 PRINTING CONTROL COMMAND SETS
Tally Dascom DT-210/230 User Guide V1.3
27
have surge protection.
Otherwise, the devices can be damaged by lightning.
• Never attempt to connect the customer display cable, drawer kick-out cable,
or the standard telephone line cable to the 10/100BASE-T LAN connector.
1. Switch on printer, press and hold the Reset key for more than 3 seconds with the tip of pen or
small tool. Then the printer will print out a status sheet as shown below.
The following are printed on the status sheet.
•TCP/IP settings.
• Other Information.
Make sure your PC IP address and printer IP address are in the same section.