User's Manual
Table Of Contents
- About This Manual
- 1 PRODUCT OVERVIEW
- 2 SETUP
- 3 INSTALLING DRIVER
- 3 CONNECTING TO COMPUTER
- 4 SETTING/CHECKING MODES
- 5 SETTING DIP SWITCHES
- 6 TROUBLESHOOTING
- 7 SPECIFICATIONS
- 8 CHARACTER CODE PAGES
- 8.1 Common to All Pages (International Character Set: USA)
- 8.2 International Character Sets
- 8.3 [User-defined page]
- 8.4 [PC437: USA, Standard Europe]
- 8.5 [PC850: Multilingual]
- 8.6 [PC852: Latin2]
- 8.7 [PC858: Euro]
- 8.8 [PC860: Portuguese]
- 8.9 [PC863: Canadian-French]
- 8.10 [PC865: Nordic]
- 8.11 [PC866: Cyrillic #2]
- 8.12 [KU42: Thai]
- 8.13 [TIS11: Thai]
- 8.14 [TIS18: Thai]
- 8.15 [PC720: Arabic]
- 8.16 [PC864: Arabic]
- 8.17 [WPC1256: Arabic]
- 9 PRINTING CONTROL COMMAND SETS
Tally Dascom DT-210/230 User Guide V1.3
9
2.2 Installing the Printer
You can install this printer horizontally. With an optional mounting plate (P/N: 99501), you can also
attach the printer to a wall.
Important Notes on Horizontal Installation:
• The printer must be installed horizontally on a flat surface (not tilted).
• Do not place the printer in dusty locations.
• Do not knock or strike the printer. This may cause defective print.
• Do not catch cables or place foreign matter under the printe r.
Important Notes on Horizontal Installation:
You need to perform the follow tasks to install the printer on a wall. For more details, turn to
Mounting Plate installation part on page 16.
• Installing the roll-paper stoppers.
• Changing the location of the roll paper near-end sensor.
• Attaching the connector cover.
• Attaching the wall mounting plate (P/N: 99501).
Be sure to attach the connector cover when you install the printer on a wall using
the wall mounting plate.