User's Manual

Tally Dascom 1225

Online State

Function Name

Switch

Operation

LED Function Description

Online {S5} L10 Toggles between Online and Offline states

Load/Eject {S4} -

x Load: Automatically loads the paper (according to path

selection) when no paper is on the platen.

x Eject: For rear tractor, it retracts the form from the

platen to allow users to install cut sheets. (NOTE:

Users have to toggle the path selection lever.)

For cut sheets, it ejects the form on the platen.

LF {S3} - Feeds a line with every press of S3.

FF [S3] -

By holding S3, the printer initially feeds a few lines; then

feeds the form to the next TOF for rear tractor or ejects

the form for cut sheets.

Tear Off {S2} L5 flashing

This is valid for tractor mode only. It feeds the form to the

tear-off position. After tearing off the form, printing starts

on the next TOF by:

x pressing S2 once, or

x receiving print data from the host.