User's Manual

6 General Specifications
Item
Description
Printing method
Serial impact dot matrix
Printing direction
Bi-Directional logic seeking character, graphics
Bi-Directional or Uni-Directional selection
Printing speed
LQ (cps)
NLQ (cps)
Draft(cps)
HS
Draft(cps)
10 cpi@china
100
200
300
None
10 cpi@OS
100
200
300
450
Print head
24 Wires / 12x2 column
Wire Dia. 0.2mm
Life 300 million Strokes/Wire *Use original ribbon
Character set
14 international character sets + one legal character set
Character font
Draft 10, 12, 15, 17.1, 20
Bank Draft 10, 12, 15, 17.1, 20
Roman 10, 12, 15, 17.1, 20cpi and proportional
OCR-A 10cpi in NLQ and LQ
OCR-B 10cpi in NLQ and LQ Courier, Gothic, SanSe
rif, Prestige elite, Script, Orator, bold
all in NLQ and LQ style and 10, 12, 15, 16.6, 17.1, 20cpi and
proportional
Character pitch
10, 12, 15, 17.1, 20cpi, Proportional
6.67, 7.5cpi
Column
CPI 10 12 15 17.1 20
80 96 120 136 160
Chinese character CPI 6.67 7.5
53 60
Print matrix
(Reference)
10CPI 12CPI
DP 12H x 24V 10H x 24V
LQ 36H x 24V 30H x 24V
Graphics H. 1/60, 1/80, 1/90, 1/120, 1/180, 1/240, 1/360
V. 1/180, 1/360
Paper handling
Feed method : Friction / Push tractor / Roll paper(TBD)
Paper pass : Cut sheet (Rear in Top out )
Fanfold paper (Rear in Top out)
Paper thickness
Cut sheet/Fanfold paper : 0.065 ～ 0.14mm
Copy paper : 0.06 ～ 0.065mm
* Maximum Total 0.52mm
Paper size
Cut sheet : 3.75 ～10.5inch(W) x 4.5 ～14.3inch(L)
76 ～267mm(W) x 114.3 ～ 363.2mm(L)
Fanfold paper : 3.75 ～10.5inch(W) x 4.5 ～22.0inch(L)
76 ～267 mm(W) x 114.3 ～ 363.2 mm(L)
Paper weight
Cut sheet/Fanfold paper :52~100gsm
Copy paper : 40~56gsm
Copy capability
Normal mode : Original + 0~3P
Copy mode : Original + 4-6P (2 pass printing)
Paper through
speed
33.3ms (1/6inch line feed)
8 inch/s(Continuous feed)
Form length
1 to 22 inches programmable by 1/360 inch unit
Ribbon
10million characters at 10cpi,Draft (with ribbon holder)