User's Manual

5. Remove the old Ribbon Cartridge before you install the new Ribbon Cartridge.( Skip this
step and operate the next step if you install the ribbon for the first time.)
6. Install the Ribbon Cartridge as shown below. Install the recess position labeled ① and ②
on ribbon cartridge into the printer mounting. Press the ribbon cartridge slightly in order to
make it installed successfully.
7. Pull out the Ribbon guide which is mounted on the Ribbon Cartridge. Press the ribbon
guide onto the print head. Turn the ribbon knob in clockwise direction till the ribbon fabric is
taut. Move the carriage left and right to ensure the carriage and ribbon fabric can move
smoothly.
.
8. Move the Print Gap Lever back to the original position to make the gap between printhead
and platen back to the original situation.
9. Close the Top Flap. When the Top Flap is closed, the Top Flap can avoid dust and reduce
printing noise when the printer is working. Opening the Top Flap is just for Ribbon
installation and adjustment.