User's Manual

Tally Dascom 1140
5.8 Restore Factory Default
The procedures to restore factory default settings:
1. Hold down the Tear key while powering on the printer and then release the key when
the print head starts to move. After loading paper, the printer prompts the Printer
Settings
Printer Settings
[TEAR]=Back, [LF]=Next, [LOAD/EJECT]=OK, [ONLINE]=Exit,
[ONLINE]+[LOAD/EJECT]=Save and restart the printer.
System Setup
2. Press the Next or Back keys to scroll forward or backward the sub-menus till the printer
shows:
Restore Factory Defaults
3. Press OK to go into restore factory default dialog. The printer prompts:
[Restore Factory Defaults]
Restore factory settings ([LOAD/EJECT]=OK, [ONLINE]=Exit)?
Yes
4. At this stage you have the option of OK to restore default setting or Exit to discard the
restoration.
5. If input OK, the printer prints an asterisk “*” appending the “Yes” and prompts
successful restoration:
Restore factory settings successfully
6. The printer beeps once to indicate successful restoration.
38