User's Manual

Tally Dascom 1140
Make sure that the power
swith “A”, located to the right
side of the printer, is in the
“ O”(off) position.
Connect the power cord to
the power inlet of the printer.
Connect the power cord plug
to a mains socket. Switch on
the printer.
2.4 Connecting the Mains Power
Checking the printer voltage
Make sure that the device has been set according to your country’s power supply voltage. To
do this, check the ratingplate at the back of the printer. Contact your dealer if the setting is
incorrect.
Never switch on the printer if the voltage setting is incorrect; this may result in
electrical damage to the printer.
6