User's Guide
Table Of Contents
- 1 PRODUCT OVERVIEW
- 2 SETUP
- 3 SOFTWARE SETUP
- 4 SETTING/CHECKING MODES
- 5 TROUBLESHOOTING
- 6 COMMUNICATION INTERFACES SPECIFICATIONS
- 7 PRINTING CONTROL COMMAND SETS
- APPENDIX I Wi-Fi CONNECTION (OPTION)
- APPENDIX II FCC STATEMENT
- APPENDIX III DASCOM EPRESENTATIVES
Tally Dascom DT-330 User Guide V1.0
50
After adding the new port, apply it for printing and finish the process.
STA mode
STA means Station mode. When the printer is working under STA mode, it works as a
wireless terminal device.
How to setup before printing:
（1）The PC should be installed with WiFi adapter.
（2）Connect the printer with the router, and obtain the IP address assigned by the router.
Run “cmd” command→enter ”ipconfig” in the Virtual DOS window. IP address will be shown.