User's Guide
Table Of Contents
- 1 PRODUCT OVERVIEW
- 2 SETUP
- 3 SOFTWARE SETUP
- 4 SETTING/CHECKING MODES
- 5 TROUBLESHOOTING
- 6 COMMUNICATION INTERFACES SPECIFICATIONS
- 7 PRINTING CONTROL COMMAND SETS
- APPENDIX I Wi-Fi CONNECTION (OPTION)
- APPENDIX II FCC STATEMENT
- APPENDIX III DASCOM EPRESENTATIVES
Tally Dascom DT-330 User Guide V1.0
48
APPENDIX I Wi-Fi CONNECTION (OPTION)
If your printer connected to the computer with Wireless Ethernet, there are two kinds of modes:
AP mode and STA mode.
AP mode
AP means Access Point. When the printer is working under AP mode, it works as an access
point to the network.
How to setup before printing:
（1）The PC should be installed with WiFi adapter.
（2）Search for ”WiFiPrinter” and connect it.
（3）Add the new port in the driver.
Click “Start”→ “Devices and Printers”, right click on the DT-330 Printer Driver, and then click
“Printer Properties”. You will see the screen as below. Click “Ports” → “Add Port”.