User's Guide
Table Of Contents
- 1 PRODUCT OVERVIEW
- 2 SETUP
- 3 SOFTWARE SETUP
- 4 SETTING/CHECKING MODES
- 5 TROUBLESHOOTING
- 6 COMMUNICATION INTERFACES SPECIFICATIONS
- 7 PRINTING CONTROL COMMAND SETS
- APPENDIX I Wi-Fi CONNECTION (OPTION)
- APPENDIX II FCC STATEMENT
- APPENDIX III DASCOM EPRESENTATIVES
Tally Dascom DT-330 User Guide V1.0
37
4 SETTING/CHECKING MODES
4.1 Print a Parameter Setting Page (Self-test Page)
Before you connect the printer to the computer, make sure that the printer is in proper working
order.
Follow the steps below to run Self-test mode.
1. Make sure the media is properly loaded, the top cover of the printer is closed and the printer
is power off.
2. Turn on the printer.
3. Keep pressing the FEED button for 4 sec, the printer starts printing a self-test page.