Operator's Manual

18 www.dascom.com
Font B: Letters and numbers print in FontB by default. The parameter of FontA is 9 * 17.
Use system default
font and cannot be changed.
Printout:
fontA:
fontB:
User-defined: Users could change the size and font, using the system font and uploaded fonts. (If the
command entails changing the font, the printer will use specific font.)
eg:
User-defined: 9 pounds. Western font file: STHUPO.TTF
User Define Chinese Fonts
Font A: set in default. Parameters: 24 * 24. Use system default font and cannot be changed.
Printout:
Font B: set in default. Parameters: 32 * 32. Use system default font and cannot be changed.
Printout:
User-defined: Users could change the size and font, using the system font and uploaded fonts. (If the
command entails changing the font, the printer will use specific font.)
eg:
User-defined size：9 pounds Western Font File: STHUPO.TTF
User Define PRINTEK Fonts
Enter Image Config – Current Emulation to set PRINTEK emulation fonts.
（1） Default font：Liberation Mono:LiberationMono-Regular.ttf.
（2） Selected font：OCRA:OCRA.ttf.
Liberation Mono:LiberationMono-Regular.ttf：
1B 40 2F 2A 2D 30 31 32 Printout：
33 34 35 36 37 38 39 3B
3A 3C 3D 3E 3F 40 41 42
43 44 45 46 47 48 49 4A 4B
4C 4D 4E 4F 50 51 52 53 54