Operator's Manual

15 www.dascom.com
Thermal Paper Type
This is a locked value. These settings are supplied by the paper manufacturer. The default settings cover most
grades of paper. If you are using non-standard paper consult the paper manufacturer for recommended settings.
NO. Standard printing energy (mJ) Less than 25~C 25~C or higher
1 0.2998 0.003666 0.003666
2 0.3074 0.001384 0.003838
3 0.3126 0.000957 0.003835
4 0.3134 0.003714 0.00339
5 0.327 0.001291 0.003487
6 0.3458 0.005085 0.004132
7 0.3678 0.005231 0.005231
8 0.3689 0.004347 0.0049
9 0.3696 0.000932 0.004887
10 0.3725 0.00219 0.004733
11 0.3821 0.002577 0.004581
12 0.3901 0.002321 0.004551
13 0.3972 0.002115 0.004878
14 0.4009 0.005592 0.005199
15 0.4087 0.004228 0.004899
16 0.4235 0.001842 0.005624
17 0.4848 0.00296 0.004133
18 0.5687 0.002823 0.006054
Power sleep
Possible values: Disabled, 10, 30, 60, 120, 180 minutes. Default value is Disabled.
This timer will turn the printer off if it has not been used for the time set. Disable this feature by setting the time
at Disable.