Operator's Manual

7 www.dascom.com
seconds.
③ With Power LED and Alert LED flashing, the printer enters into Configuration mode after 30
seconds.
④ You could upgrade the firmware via the web.
Configuration
Configuration of the DP-581H printer is done through a built-in web page. This allows you to
configure the printer from any device that has a browser and is compatible with your DP-581H
communication capabilities.
1. Turn the printer ON.
2. Connect a USB cable between the printer and a PC.
3. To access the DP-581H web page, push the Power button twice rapidly. This will put the printer
into Configuration mode.
4. When the printer is in Configuration mode the POWER and FAULT LEDs will flash together.
a. Open browser on your PC and type 169.254.200.1
into the address bar of the browser and hit
Enter - A login box should appear:

b. Type “0000”or”0581” and hit Enter- you should now be at the home page for DP-581H
Configuration.Two passwords correspond to two modes:User mode and service mode.In
User mode,the web configuration function is intuitive. In service mode,the web configuration is
comprehensive.(the following is an example of service mode).