User's Manual

9
www.dascom.com
3. Click next to continue and complete installation.
B. Configuration Setup
1. Turn the printer ON.
2. Make sure you installed the latest configuration tool.
3. Connect a USB cable between the printer and a PC.
4. Open the configuration tool on the desktop. You could change the settings.
Units
Select between inches or millimeters. Default setting is inches.
Max Paper Speed
Possible values: 1.0 to 5.5 ips, Default = 5.0
When using labels or heavy paper stock, you may need to decrease the paper speed to prevent paper jam
errors.
Mark Seeking
Possible values: Off, Front, Rear, Gap. Default= Off (Note: Rear and Gap apply to 530L models only)
Set the value when using regular or label media with appropriate characteristics. To align the printed image to
the media, the printer will use the indicator according to the user choice here.
Front Paper Sensor Threshold
Possible values 0-100%. Default value is 75%
When using paper with a black on the front adjust this setting to insure the paper stops at the black mark.
• If the printer is not detecting black marks reliably, set the Mark Sensitivity to a lower value.