User's Manual

Tally Dascom DM-210/220
13
4 Specifications
4.1 Data Sheet
Print method
9 pin dot matrix (Pin ф0.30mm)
Print direction
bidirectional logic-seeking
Resolution
max 160dpiH x 144dpiV
Print speed 4.3lps(4.3 line / sec at 42 columns)
Paper feed
speed
max 5.51ips (14cm/s)
Print width
42cpl @ 16.7cpi (7x8 matrix)
Interface
Cashbox: DC 24V, 1A, 6 line RJ-11 connector
USB 2.0: Full Speed, standard type B Connector
Serial RS232C: 25-pin Sub-D (f) connector; supports DTR or
XON/XOFF handshaking protocol; baud rate 4800~38400BPS; data
Format 1 initial bit + 8 data bit + 1 or 2 stop bits, no Parity.
Parallel CENTRONICS: 25-pin Sub-D (m) connector, 8-bit parallel;
supports BUSY/ACK handshaking protocol.
Print
Parameter
Power Sleep
Yes
Cartridge
Ribbon
NH37701 (Purple), Lifetime: 3000,000 characters (Compatible to
ERC-39)
NH37703 (Black), Lifetime: 1000,000 characters
Copies
1+1 (Thickness: 0.05~0.08mm/page; Total thickness: ≤0.16mm)
Paper Feed
Friction feed
Memory RAM
Max. 32Kbytes data buffer
Chinese
GB18030_2000 16x16
Alphanumeric
7x8 and 9x8 ASCII font
Fonts
Code page
PC437/PC850/PC860/PC863/PC865/PC858
Detect
Function
Black Mark
Detection
In the direction of paper feed:
Mark height 5mm; Mark width min 12mm;
Mark reflectivity < 10%; Non-mark reflectivity > 75%;
Mark to initial print position: 27mm; Mark to tear position 47mm;
Factory default: Mark detection on the right for receipt face; Can be
changed to left using mark control commands.
Key
Feed key
Power indicator
Green LED
Paper indicator
Red LED
Key and
LED Indicator
Error indicator
Red LED
External power adapter
Input
AC 100V-240V 50-60Hz
Power Supply
Output
DC 24V±5%, 2.1A, A-1009-3P interface
Paper type
Good quality normal white roll paper or carbonized roll paper
Paper width
76.2±0.5mm (3 inch)
Paper thickness
0.06～0.085mm for single paper
Paper roll
diameter
Max. OD ф83mm
ID ф10+2/-0mm
Paper load
Upward cover open and Easy paper loading
Paper Handle
Paper cut
DM-210: Manual tear;
DM-220: Auto-cutter; support full cut and partial cut.
Full cut (Cuts the paper completely)