User's Manual

Tally Dascom DM-210/220
5
1.5 Connecting the Power
Checking the printer voltage
Make sure that the device has been set according to your country’s power supply voltage. To
do this, check the rating plate at the rear of the printer. Contact your dealer if the setting is
incorrect.
1. Make sure the printer and the computer are powered off ①.
2. Connect the power cord to the power adapter ②, and connect the power adapter to the power
supply socket at the rear of the printer ③. Ensure the power cord is securely connected. Finally,
connect the power cord plug to a mains socket on the wall ④.
 Power on and power off
1. Press the power switch to the “I” position to turn on the printer.
Upon power-on, the Power LED indicator light up.
2. Press the power switch to the “O” position to turn off the printer.