User's Guide

Tally Dascom DL-830 User Guide V1.0
13
1.8 Control Panel
1.8.1 Normal/Setup modes operation
Normal Mode
(Ready to print operation)
Setup Mode
LCD
 The 1
st
and 3
rd
lines constantly shows
the model name and Setup,
respectively.
 The 2
nd
line shows the current status,
or the error message if a fault occurs.
 The 1
st
line constantly shows the model
name.
 When the 2
nd
line shows one of the five
major configuration menus, the 3
rd
line
shows Setup.
 When the 2
nd
line shows a sub-menu
configuration, the 3
rd
shows the valid
setting value.
Power LED
Lights up to indicate the printer is turned
on.
Lights up to indicate the printer is turned
on.
∷
button
Enter Setup mode.
Press twice to terminate the given
item/value
▎▎button
Pause the print job.
Scroll backward
■button
Complete the current print job; then
suspend the printer.
Scroll forward
►►button
For non-continuous media, advance to
next label or top-of-form position.
For continuous media, a press feeds the
media 1 line; holding this button feeds
multiple lines until the button is released.
This action varies if options are enabled:

Label peeler: the label is fed to the
peel off position. Further pressing the
►►button has no effect until the label
is removed.
 Auto-cutter: Printed label is fed to cut
position directly.
Accept the given item/value.