User's Guide

Tally Dascom DL-830 User Guide V1.0
3
Optional kit
sensor
Label peel-off sensor
Emulation
Zebra
ZPL, EPL, TSPL
Power
Supply
Input
AC 100V-240V, 50-60Hz
Output
DC 24V；1.5A
Memory
SDRAM
32MB
FLASH
8 MB
Interface
Standard
USB (2.0 Full-Speed)
Ethernet: 10M/100M
Optional
Parallel Centronics (IEEE-1284)
Wi-Fi Interface(802.11b/g)
Serial:
RS-232Serial（DB25）
Software
Driver (Windows 32bit/64bit), Bartender, SDK system
Physical
Spec.
Dimensions
240(W)×440(D)×255(H)mm
Casing Color
Black
Weight
9.8kg
Operating
condition
0~45℃ 20%~95%RH (non-condensing)
Storage
condition
-20~60℃/≤95%RH (non-condensing)
Certification
CE, FCC,ETL
Optional kit
Cutter, Peeler
Reliability
TPH lifetime
150km
(Condition: use specific thermal roll paper and the print rate
is 12%)
1.3 Consumables
Important: Use genuine media to ensure the best print quality. The special
designed paper, polyethylene and polyester media improve the performance
and the print head life.
This printer supports three classes of print media:
Adhesive Labels - individual label or continuous roll, with adhesive material on its back, laying
over a backing tape (liner).
Receipt - generally thermal sensitive paper in a roll.
Ticket & Tag - generally made of thick paper (max. 0.25 mm); with perforation between label.
The print media can be in a roll or fanfold.
Thermal sensitive media (direct thermal) must be used without ribbon.
Choose correct type of media for your application.