User's Manual

Tally Dascom DL-210 User Guide V1.3

2.6 Connecting to Computer

NOTE!

Be sure to install the driver before connecting the printer to the host computer.

Before installing, disconnect the Power Unit from the printer (as well as turning the power switch

off). Even when the power switch is off, voltage is still present at some points on the circuit board.

Changing components while the power unit is connected can cause damage to the interface board

and the printer.

Component Name

Function

Power socket

Connect power cord to the printer

Power switch

For switching on/off printer

USB interface

Connect USB interface cable from host

Optional interface

(Serial/ Parallel/ Ethernet)

Connect optional interface cable from host

(interface type is on request)

Connection cable must comply with the following requirements:

Connection Type

Specifications

USB

USB 1.1/2.0 compatible

Serial

RS232

Parallel

IEEE 1284.4

Ethernet

10 Base-T/100 Base-TX compatible

Power Switch

Optional Interface

(Serial/ Parallel/

Ethernet/

Bluetooth）

USB interface

Power Socket