User's Manual

Tally Dascom DL-210 User Guide V1.2
39
4 n/c Not connected
5 n/c Not connected
6 RX- Receive Data-
7
n/c
Not connected
8 n/c Not connected
• Ethernet interface connector diagram
5.2.5 Serial interface
• Serial interface pin assignment
Serial interface compatible with RS-232 standard, with 25 pin (D hole type) socket.
PIN No. Description
PIN 1 Frame Ground
PIN 2 TXD
PIN 3 RXD
PIN 4 RTS
PIN 5 Unconnected
PIN 6 DSR
PIN 7 Signal Ground
PIN 8~19 Unconnected
PIN 20 DTR
PIN 21~25 Unconnected
User can view the setting of interface via printing configuration sample.
The default setting of serial interface is as follow, 38400 bps (baud rates), 8 bit (data bit), 1 bit (stop
bit), no parity, support RTS/CTS handshaking protocol.
• Serial interface connector diagram
5.2.6 Parallel interface
• Parallel interface pin assignment
Parallel interface with 36 pin CENTRONICS socket.
Pin No. Signal From Description
1 H
Strobe Signal; Data latch pulse, latch the data to the printer
at the rising edge of the negative pulse.