User's Manual

Tally Dascom DL-210 User Guide V1.2
35
4.2 Resetting the Factory Default Values
Sometimes, resetting the printer to the factory defaults may solve some problems.
There are two methods to set to factory setting:
Method one: Hold down Feed Key and switch on printer till Power LED blinks four times, buzzer
beeps four times.
Method two: through setup tool, choose restore all setting on printer setup page.
4.3 Removing Jammed Label
Print head may be hot, please do not touch!
(1) Turn printer off, open top cover and turn up print head mechanism.
(2) Remove the jammed label and ribbon, clean the print head with alcohol in case of ribbon paste
on print head and cause poor print quality.
(3) Reload media.
(4) Reload ribbon and turn the ribbon adjustor for rewinding the sticky part.
4.4 Cleaning Thermal Print Head
•
After printing, the thermal print head becomes very hot. Be careful not to touch
it and to let it cool before you clean it.
•
Do not damage the thermal print head by touching it with your fingers or any
hard object.
• Turn off the printer, open the top cover and remove ribbon, clean the thermal elements of the
print head with a cotton swab moistened with alcohol solvent (ethanol, methanol, or isopropyl).
• We recommend cleaning the thermal print head periodically (generally every 3 months) to
maintain print quality.
4.5 Maintenance
DL-210 is designed for a long and reliable lifetime. But periodic maintenance is recommended in
order to assure error free working. This also would guarantee the good print quality over the life
time. It is recommended to clean the printer once every six months or after 300 hours duty.
Before cleaning, switch off the printer, wait a few seconds and unplug the power cord.
• Open the cover and remove the dust, paper shreds and other debris from inside by using a soft
vacuum cleaner or a brush.
• In order to remove the dirt, you can wipe clean the machine with a soft cloth dipped in alcohol