User's Manual

Tally Dascom DL-210 User Guide V1.2
31
Cutter Switch On, Off Off Enable cutter or not
Print Position
Detection
On, Off Off Enable print position detection or not
Auto Calibrate
Label
On, Off Off
On: It will auto calibrate the label when you use a
different size label.
Off: Disable auto calibrate label
Paper End
Detection
On, Off On
On: Detect the printer's paper is empty or not.
Off: Disable paper end detection.
Black mark AD
value
User-define 789
It can make the black mark detection more
accurately according to the AD value.
 Explanation for Buttons
Button Description
Get Printer Setting
When printer is powering on, click this button for acquiring the current setup menu. It
will display on the screen.
Print Self-test Click this button for printing self-test printout.
Restore All Setting Click this button for restore all setting.
Send Setting
The new setting will be valid if click this button. If no any change, it will keep the
default value.
• After setting, the printer will beep once, then the setting become valid.
• In order to enhance print head lifetime, it is recommended that setting low print density if
print quality is satisfactory.
3.2.3 Update Firmware
(1) Preparation
USB cable, 24V power adapter, DL-210 setup tool, firmware file.
(2) Connection
Connect printer and host with USB cable firmly. Check the Device Manager, if connection is
successful, “USB printing support” will display under “universal serial Bus Controllers” directory.
Otherwise, please check the connection between printer and USB interface, please check whether
the Driver installation is successful or not.