User's Manual

Tally Dascom DL-210 User Guide V1.2
28
3 OPERATION GUIDE
3.1 Control Panel Operation
3.1.1 LEDs Behavior
LEDs LEDs’ behavior Status
Power
On ○ Power on.
Off ● Error or power off.
Status
On ○ Paper end.
Off ● Normal.
Fast blink ○●○●○●○
Label remains in peeler.
Slow blink ○●●○●●○
Ribbon end.
Error
On ○ Print head mechanism is opened.
Off ● Normal.
Fast blink ○●○●○●○
Print head is over-heated.
3.1.2 Feed Key Operation
• Feed Paper
Under ESC/POS mode, presses Feed Key once, feed paper one line (30 steps);
Under ESC/POS mode, hold down Feed Key without release, feed paper continuously;
Under ZPL/EPL mode, press Feed Key once, feed one piece of label;
Under ZPL/EPL mode, hold down Feed Key without release, feed labels continuously.
• Hexadecimal dump
Hold down Feed Key and switch on printer till Power LED blinks three times, buzzer beeps three
times.
When self-test is OK but on-
line printing error occurs, you can check the
communication between PC and program via Hexadecimal Dump mode. In
Hexadecimal Dump mode, the printer will print out hexadecimal data once it
receives the signal from host. You can ask technical service for analysis.