User's Manual

Tally Dascom DL-210 User Guide V1.2
12
2.4 Print a Parameter Setting Page (Self-test Page)
Before you connect the printer to the computer, make sure that the printer is in proper working
order.
You can do this by printing a configuration status label.
1. Make sure the media is properly loaded, the top cover of the printer is closed and the printer is
power off. Then, press and hold the Feed button once you are ready.
2. Hold down Feed Key and then switch on printer till Power LED blinks once, buzzer beeps once.
3. The printer will print out a parameter setting page.
Here is the self test page and its explanation:
Model
Serial Number
ID Number
F/W
Interface type
Emulation supported
Media type
Printing method
Printhead life
Sensor
Memory size
Density
Peeler status
Black mark status
Cutter status
Detect lack of media
Auto verify label status
Detect postion status
Page mode status
Current printing speed
Current printing width
Parameter settings
Model DL-210
SN NO XXXXXXXXXXXX
ID NO 28.904.XX
Firmware versio................................20.00.08
Interface...................................................USB
Emulation..............................................ZPLII
Media.....................................................Label
Print Type................................Direct Thermal
Print count..................................................0m
Sensor AD….1_0 2_1 D_480 B_517 50.0 2.0
Memory................................................8192K
Print Density..................................................1
Peeler.........................................................Off
Black Mark................................................Off
Cutter.........................................................Off
Paper end detection....................................On
Auto verify label........................................Off
Detect print position..................................Off
Page mode..................................................On
Print Speed.......................................150mm/s
Print Width........................108mm (8dot.mm)
Complete
Dascom