User's Manual
Table Of Contents
- CHAPTER 1 INTRODUCTION
- CHAPTER 2 INSTALLATION
- CHAPTER 3 NORMAL MODE AND USER MODE
- 3.1 Normal Mode
- 3.2 User Mode
- 3.3 The major menus
- 3.3.1 Sub-menus for Printer Info
- 3.3.2 Sub-menus for Head Info
- 3.3.3 Sub-menus for Version Info
- 3.3.4 Sub-menus for Printer Setup
- 3.3.5 Sub-menus for card setup
- 3.3.6 Sub-menus for Ribbon/Film Setup
- 3.3.7 Sub-menus for Image Setup
- 3.3.8 Sub-menus for Interface Setup
- 3.3.9 Sub-menus for Cleaning
- 3.3.10 Sub-menus for Option
- 3.3.11 Sub-menus for Reset User Default
- CHATPER 4 CLEANING
- CHATPER 5 TROUBLESHOOTING
- CHAPTER 6 SPECIFICATION
- Appendix I: OPTIONS
- Appendix II: FCC STATEMENT
- Appendix III: DASCOM REPRESENTATIVES
Dascom DC-7600 User Guide V1.0
5.3 Troubleshooting
Do not attempt to use any tool to fix any problem. This may cause serious damage to the
printer.
5.3.1 Faults Related to Printing
No print out?
① Check the printer driver
Check compatible printer driver for Microsoft Windows
Check if this printer is the default driver in Microsoft Windows.
② Check if power is connected to the printer
Check if the printer is connected correctly to power.
Check if the LCD display shows: READY.
Confirm power accessories provided for this printer are correctly installed.
③ Check the USB cable
Check if the USB cable is connected to your printer and your host.
④ Check the ribbon and the retransfer film
Check if the ribbon and retransfer film are properly installed. Check if associated parts are
locked in properly.
⑤ Check card jam
Check if any cards remains in transport area. Check
if any card jam.
A
○
6E APrint the test card
You can realize the reverse steps refer to this
section.
78