User's Manual
Table Of Contents
- CHAPTER 1 INTRODUCTION
- CHAPTER 2 INSTALLATION
- CHAPTER 3 NORMAL MODE AND USER MODE
- 3.1 Normal Mode
- 3.2 User Mode
- 3.3 The major menus
- 3.3.1 Sub-menus for Printer Info
- 3.3.2 Sub-menus for Head Info
- 3.3.3 Sub-menus for Version Info
- 3.3.4 Sub-menus for Printer Setup
- 3.3.5 Sub-menus for card setup
- 3.3.6 Sub-menus for Ribbon/Film Setup
- 3.3.7 Sub-menus for Image Setup
- 3.3.8 Sub-menus for Interface Setup
- 3.3.9 Sub-menus for Cleaning
- 3.3.10 Sub-menus for Option
- 3.3.11 Sub-menus for Reset User Default
- CHATPER 4 CLEANING
- CHATPER 5 TROUBLESHOOTING
- CHAPTER 6 SPECIFICATION
- Appendix I: OPTIONS
- Appendix II: FCC STATEMENT
- Appendix III: DASCOM REPRESENTATIVES
Dascom DC-7600 User Guide V1.0
3.2 User Mode
User Mode allows changing the parameters and checking the status.
Steps to change from Normal Mode to User Mode:
1) After LCD displays [READY], press Menu/Exit Key for 1 second then release it. The LCD changes
its display to [Printer Info.], which is the entry menu in User Mode:
2) Press【 Menu /Exit】 Key for 3 second then release it. The LCD shows [Choose mode]. Press ▲
or ▼ Keys to select User Mode or Service Mode:
Even when the printer is in an error state, you can change modes.
Step to return to Normal Mode from User Mode:
1) Continually press Menu/Exit Key until the LCD shows [Quit the Menu]. Then press SET Key to
return to Normal Mode:
Quit the Menu？
Yes
Choose mode
Service Mode
Ready
Menu/Exit
Printer Info.
Setup:
Ready
Menu/Exit
Choose mode
User Mode
57