User's Manual
Table Of Contents
- CHAPTER 1 INTRODUCTION
- CHAPTER 2 INSTALLATION
- CHAPTER 3 NORMAL MODE AND USER MODE
- 3.1 Normal Mode
- 3.2 User Mode
- 3.3 The major menus
- 3.3.1 Sub-menus for Printer Info
- 3.3.2 Sub-menus for Head Info
- 3.3.3 Sub-menus for Version Info
- 3.3.4 Sub-menus for Printer Setup
- 3.3.5 Sub-menus for card setup
- 3.3.6 Sub-menus for Ribbon/Film Setup
- 3.3.7 Sub-menus for Image Setup
- 3.3.8 Sub-menus for Interface Setup
- 3.3.9 Sub-menus for Cleaning
- 3.3.10 Sub-menus for Option
- 3.3.11 Sub-menus for Reset User Default
- CHATPER 4 CLEANING
- CHATPER 5 TROUBLESHOOTING
- CHAPTER 6 SPECIFICATION
- Appendix I: OPTIONS
- Appendix II: FCC STATEMENT
- Appendix III: DASCOM REPRESENTATIVES
Dascom DC-7600 User Guide V1.0
“Graphic Setting” Tabs
• Color setting
User can get the proper color via settings. User can also adjust the color brightness, contrast and chroma.
• Settings of Black ribbon using
User can print black via print K color or YMC secondary colors and K color. As well as, user can choose
monochrome printing, color printing, set the black valid area and the black invalid area.
“Black ribbon settings”
• Monochrome printing or color printing
Choose the card which is monochrome printing or color printing.
• The printing method of black data.
Set black color via using K color to print or using YMC secondary colors and K color to print.
• The valid area of black printing
48