User's Manual
Table Of Contents
- CHAPTER 1 INTRODUCTION
- CHAPTER 2 INSTALLATION
- CHAPTER 3 NORMAL MODE AND USER MODE
- 3.1 Normal Mode
- 3.2 User Mode
- 3.3 The major menus
- 3.3.1 Sub-menus for Printer Info
- 3.3.2 Sub-menus for Head Info
- 3.3.3 Sub-menus for Version Info
- 3.3.4 Sub-menus for Printer Setup
- 3.3.5 Sub-menus for card setup
- 3.3.6 Sub-menus for Ribbon/Film Setup
- 3.3.7 Sub-menus for Image Setup
- 3.3.8 Sub-menus for Interface Setup
- 3.3.9 Sub-menus for Cleaning
- 3.3.10 Sub-menus for Option
- 3.3.11 Sub-menus for Reset User Default
- CHATPER 4 CLEANING
- CHATPER 5 TROUBLESHOOTING
- CHAPTER 6 SPECIFICATION
- Appendix I: OPTIONS
- Appendix II: FCC STATEMENT
- Appendix III: DASCOM REPRESENTATIVES
Dascom DC-7600 User Guide V1.0
CHAPTER 2 INSTALLATION
2.1 Installing Cards
Cards can be loaded automatically from the card cassette or manually from the manual feed
slot.
• The card cassette can hold a large quantity of cards making it convenient for mass or large-
scale printing.
• Feeding cards one-by-one manually is well-suited for printing cards with different features
such as magnetic stripe, or RFID mifare contactless cards.
2.1.1 Card Specifications
This printer supports CR-80 cards.
Dimensions：85.6mm × 54mm
Thickness: 0.48mm ～ 1.10mm
Types: blank card, magnetic stripe card, contact smart card, contactless smart card, and
pre-printed card.
• Non CR-80 cards may cause defective print results or become stuck or lodged in the
printer requiring service.
• Do not use the cards listed below:
- Previously printed cards
- Damp cards
- Cards containing foreign particles, such as glass or metal
- Embossed cards
- Cards contaminated with oil, grease or dirt
- Defective cards with damages ,cracks, broken corners, or bends
- Transparent Cards
- Cards with odd shapes that are not CR80 in size
22