User's Manual

Dascom DC-7600 User Guide V1.0
Do not place heavy items on the printer and do not lean on the printer.
While the printer is operating, do not turn off the power, unplug the power
cable, or look inside (open) the printer.
WARNING
The lower part of the Top Access Cover, the printer internal heat roller section, and the
thermal head section become very hot. Ensure you do not touch these three locations.
• The cooling fan is always running for cooling inside the printer. This is not a
malfunction.
• Contact your reseller if there is a current leak.
• The printer may cause static, flickering or interrupt reception of televisions or radios
if they are too close to the printer.
• The lower part of cover top, internal heating platen and printer head may produce
high temperature, please don’t touch these three parts.
Under the following conditions images on cards may deteriorate or
cards may warp after printing:
• The surface of the card is in contact for an extended period with a
vinyl card holder or synthetic leather or other material that contains a
plasticizer.
• The surface of the card is exposed to direct sunlight for an extended
period.
• The card is repeatedly rubbed against a hard object such as a key.
• The faces of two cards are in contact for an extended period.
• The card is kept for an extended period in a very hot location such as
a car parked in the sun.
• The card is bent, or used with excessive force.
If a card with a magnetic strip is placed near a magnetic source, the data
on the strip could become corrupted.
Additionally, if an IC chip card is bent, or used with excessive force, the
IC chip may be damaged.
6