User's Manual

Dascom DC-7600 User Guide V1.0
Power supply
Use a dedicated power cable and do not use an extension cord with multiple
outlets.
Be sure to remove any dust from the plug and electrical outlet.
Humidity produces a micro-current on the surface causing overheating.
Do not damage or modify the Power Cable. Also, do not place heavy objects,
pull, or bend power cord excessively.
Do not plug in or unplug the Power Cable if your hands are wet.
Ensure a ground wire is connected.
When connecting the ground wire, note the following cautions.
Recommended connections for ground wires
Electrical outlet ground terminal
Ground terminals installed as type A, B, or C
A copper rod 65 cm (25.6 inches) or longer buried in the ground.
Not permitted for ground wires
Gas piping (risk of fire or explosion)
Water pipes or taps (water pipes that include plastic piping cannot act as a
ground However, if a water pipe is configured to act as a ground, then
connection of a ground wire is permitted.)
Telephone line ground wires or lightning conductors (danger of high current
flow in the event of a lightning strike.)
Be sure to turn off power and unplug the plug from electrical outlet before
moving the printer.
Pull on the plug or cable when unplugging it from an electrical outlet.
Do not use an under-rated extension cord.
Handling
Do not use flammable sprays near the printer.
Do not touch anything inside the printer unless specified in this manual.
5