User's Manual

DC-3300 User Manual v1.0
27

（1）Lift the  cover open leverto open
thetopcover.



（2）
Placetheribbonverticallyinto
theribboncartridgeslot(thenew
ribbonspindleintothefrontribbon
cartridgeslot,andtheemptyribbon
spindleintotherearribboncartridge
slot).Tightentheribbon,andclosethe
topcovertoitsoriginalposition. 


 
（1）When the ribbon roller is mounted to the cartridge base, push it
downtothebottomwithalittleforce.
（2）After installation, the ribbon film should be slightly tightened,
withoutanynoskew.
 