User's Manual
Table Of Contents
- Chapter 1 Introduction
- CHAPTER 2 INSTALLATION
- CHAPTER 3 NORMAL MODE AND USER MODE
- 3.1 Normal Mode
- 3.2 User Mode
- 3.3 The major menus
- 3.3.1Sub-menus for Printer Info
- 3.3.2Sub-menus for Head Info
- 3.3.3Sub-menus for Version Info
- 3.3.4Sub-menus for Printer Setup
- 3.3.5Sub-menus for card setup
- 3.3.6Sub-menus for Ribbon Setup
- 3.3.7Sub-menus for Image Setup
- 3.3.8Sub-menus for Interface Setup
- 3.3.9Sub-menus for Cleaning
- 3.3.10Sub-menus for Option
- 3.3.11Sub-menus for Reset Default
- CHATPER 4 CLEANING
- CHATPER 5 TROUBLESHOOTING
- CHAPTER 6 SPECIFICATION
- Appendix I FCC STATEMENT
- Appendix II DASCOM REPRESENTATIVES
DC-2300 User Manual v1.0
49
Incomplete printout?
① Check manual settings
Check card software design layout matches card dimensions.
Check the landscape/portrait orientation in the driver.
② Check interface cable
If the text is printed in strange colors, use the USB cable supplied with the
printer. Check secure and proper connection between printer and your
computer.
Try another cable.
③ Check if the printer is clean
See Section 2.3 to clean/replace cleaning rollers.
④ Check if cards are clean
Take precautions to keeps cards free from dust and contamination.
⑤ Check ribbon
Check if ribbon is installed properly. Check that the ribbon is running smoothly.
⑥ Check print head
If a straight white line(s) travels across the length of your card, the print head may be
dirty or defective. If the problem persists after cleaning, please contact your Dascom
reseller.