User's Manual
Table Of Contents
- Chapter 1 Introduction
- CHAPTER 2 INSTALLATION
- CHAPTER 3 NORMAL MODE AND USER MODE
- 3.1 Normal Mode
- 3.2 User Mode
- 3.3 The major menus
- 3.3.1Sub-menus for Printer Info
- 3.3.2Sub-menus for Head Info
- 3.3.3Sub-menus for Version Info
- 3.3.4Sub-menus for Printer Setup
- 3.3.5Sub-menus for card setup
- 3.3.6Sub-menus for Ribbon Setup
- 3.3.7Sub-menus for Image Setup
- 3.3.8Sub-menus for Interface Setup
- 3.3.9Sub-menus for Cleaning
- 3.3.10Sub-menus for Option
- 3.3.11Sub-menus for Reset Default
- CHATPER 4 CLEANING
- CHATPER 5 TROUBLESHOOTING
- CHAPTER 6 SPECIFICATION
- Appendix I FCC STATEMENT
- Appendix II DASCOM REPRESENTATIVES
DC-2300 User Manual v1.0
42
3.3.4 Sub-menus for Printer Setup
View and change operation parameters:
Buzzer: OFF\ON
Power Save Mode: OFF\ 5~120
Language: Chinese\English\Japanese
OLED Contrast: 128
Card detection: OFF\ON (In "ready to print" state to detect whether card slot is empty)
3.3.5 Sub-menus for card setup
View and change card properties:
Card type: PVC/PET/PET-G/PC
Std card exit: FRONT SIDE\REAR SIDE
Error card exit: FRONT SIDE\REAR SIDE
Card loading mode:Card cassette,Card loading after demanding/automatic
Eject card clip card:ON/OFF
Front cassette full detection:ON/OFF
Manual card fetching adjustment:(+20mm--20mm)
If the printer is not configured with duplex option, the error cards are
ejected from rear slot by default.
3.3.6 Sub-menus for Ribbon Setup
View and change ribbon:
Ribbon Type: YMCKO / K/ 1/2(YMC)KO/ YMCKOO
Ribbon near end(%)（%）： 0~100
Ribbon thickness: Thin / Thick
Ribbon Info update:Dynamic / Static
Ribbon encryption Level:(01~10,-500~500)
Initialize ignores ribbons:OFF/ ON
When the unused amounts of ribbon reaches the values specified in
Ribbon near end(%), the OLED displays warning messages: “Check Ribbon”.
3.3.7 Sub-menus for Image Setup
View and manage the color settings:
Yellow Balance: ±64
Magenta Balance: ±64
Cyan Balance: ±64
Black Balance: ±32
OP Balance: ±64
Color Brightness: light / dark / customer setting