User's Manual
Table Of Contents
- Chapter 1 Introduction
- CHAPTER 2 INSTALLATION
- CHAPTER 3 NORMAL MODE AND USER MODE
- 3.1 Normal Mode
- 3.2 User Mode
- 3.3 The major menus
- 3.3.1Sub-menus for Printer Info
- 3.3.2Sub-menus for Head Info
- 3.3.3Sub-menus for Version Info
- 3.3.4Sub-menus for Printer Setup
- 3.3.5Sub-menus for card setup
- 3.3.6Sub-menus for Ribbon Setup
- 3.3.7Sub-menus for Image Setup
- 3.3.8Sub-menus for Interface Setup
- 3.3.9Sub-menus for Cleaning
- 3.3.10Sub-menus for Option
- 3.3.11Sub-menus for Reset Default
- CHATPER 4 CLEANING
- CHATPER 5 TROUBLESHOOTING
- CHAPTER 6 SPECIFICATION
- Appendix I FCC STATEMENT
- Appendix II DASCOM REPRESENTATIVES
DC-2300 User Manual v1.0
40
When SET: >> appears on the second line of the menu, pressing SET Key enters
available sub-menus . Below, the right menu is the sub-menu of the left one.
Consecutively press Menu/Exit Key until the OLED shows [Quit the Menu]. Then press
SET Key to return to Normal Mode:
SET Key must be pressed to save the newly changed value.
Pressing Menu/Exit Key or switching off the printer will not save any newly
changed value(s).
Printer Info
SET: >>
SET Key
Menu/Exit Key
Head Info
SET: >>
Printing times
1.0.10.0
Quit the Menu?
Yes
Ready
SET Key