User's Manual
Table Of Contents
- Chapter 1 Introduction
- CHAPTER 2 INSTALLATION
- CHAPTER 3 NORMAL MODE AND USER MODE
- 3.1 Normal Mode
- 3.2 User Mode
- 3.3 The major menus
- 3.3.1Sub-menus for Printer Info
- 3.3.2Sub-menus for Head Info
- 3.3.3Sub-menus for Version Info
- 3.3.4Sub-menus for Printer Setup
- 3.3.5Sub-menus for card setup
- 3.3.6Sub-menus for Ribbon Setup
- 3.3.7Sub-menus for Image Setup
- 3.3.8Sub-menus for Interface Setup
- 3.3.9Sub-menus for Cleaning
- 3.3.10Sub-menus for Option
- 3.3.11Sub-menus for Reset Default
- CHATPER 4 CLEANING
- CHATPER 5 TROUBLESHOOTING
- CHAPTER 6 SPECIFICATION
- Appendix I FCC STATEMENT
- Appendix II DASCOM REPRESENTATIVES
DC-2300 User Manual v1.0
38
3.2 User Mode
User Mode allows changing the parameters and checking the status.
Steps to change from Normal Mode to User Mode:
1) After OLED displays [READY], press Menu/Exit Key for 1 second then release it. The
OLED changes its display to [Printer Info.], which is the entry menu in User Mode:
2) Press
【
Menu /Exit
】
Key for 3 second then release it. The OLED shows [Choose mode].
Press ▲ or ▼ Keys to select User Mode or Service Mode:
Choose mode
Service Mode
Even when the printer is in an error state, you can change modes.
Steps to return to Normal Mode fromUser Mode:
In User Mode, press Menu/Exit Key to return.If you press Menu/Exit Key when you are in
first level menu, the OLED shows [Quit the Menu]. Then press SET Key to return to Normal
Mode:
Quit the Menu
？
Yes
Ready
Menu/Exit
Printer Info.
Setup:
Ready
Menu/Exit
Choose mode
User Mode