User's Manual
Table Of Contents
- Chapter 1 Introduction
- CHAPTER 2 INSTALLATION
- CHAPTER 3 NORMAL MODE AND USER MODE
- 3.1 Normal Mode
- 3.2 User Mode
- 3.3 The major menus
- 3.3.1Sub-menus for Printer Info
- 3.3.2Sub-menus for Head Info
- 3.3.3Sub-menus for Version Info
- 3.3.4Sub-menus for Printer Setup
- 3.3.5Sub-menus for card setup
- 3.3.6Sub-menus for Ribbon Setup
- 3.3.7Sub-menus for Image Setup
- 3.3.8Sub-menus for Interface Setup
- 3.3.9Sub-menus for Cleaning
- 3.3.10Sub-menus for Option
- 3.3.11Sub-menus for Reset Default
- CHATPER 4 CLEANING
- CHATPER 5 TROUBLESHOOTING
- CHAPTER 6 SPECIFICATION
- Appendix I FCC STATEMENT
- Appendix II DASCOM REPRESENTATIVES
DC-2300 User Manual v1.0
31
Watermarks Setting
O Layer Area: Printing area and content of layer O,"None" , "Full Page" and "From Bitmap".
Coverage mode: Normal and reverse.O layer do not print when choosing”Full Page” in the O Layer
Area and choosing “Reverse in the Coverage mode.”
O Value: The threshold range is from 0 to 255, the large the value is, the more obvious the printing
effect of the layer is.
O Layer File Path: Choose “From Bitmap” in the O layer Area.Click "Browse”to select the path to
add a custom bitmap. which must be a monochromatic bitmap with1016 x 656 pixels. Click
"Recall" can delete the added bitmap.