User's Manual
Table Of Contents
- Chapter 1 Introduction
- CHAPTER 2 INSTALLATION
- CHAPTER 3 NORMAL MODE AND USER MODE
- 3.1 Normal Mode
- 3.2 User Mode
- 3.3 The major menus
- 3.3.1Sub-menus for Printer Info
- 3.3.2Sub-menus for Head Info
- 3.3.3Sub-menus for Version Info
- 3.3.4Sub-menus for Printer Setup
- 3.3.5Sub-menus for card setup
- 3.3.6Sub-menus for Ribbon Setup
- 3.3.7Sub-menus for Image Setup
- 3.3.8Sub-menus for Interface Setup
- 3.3.9Sub-menus for Cleaning
- 3.3.10Sub-menus for Option
- 3.3.11Sub-menus for Reset Default
- CHATPER 4 CLEANING
- CHATPER 5 TROUBLESHOOTING
- CHAPTER 6 SPECIFICATION
- Appendix I FCC STATEMENT
- Appendix II DASCOM REPRESENTATIVES
DC-2300 User Manual v1.0
20
CHAPTER 2 INSTALLATION
2.1 Installing Cards
Cards can be loaded automatically from the card cassette, which can hold a large quantity of
cards making it convenient for mass or large-scale printing.
2.1.1 Card Specifications
This printer supports CR-80 cards.
Dimensions: 85.6mm × 54mm
Thickness: 0.25mm～1.25mm
Types: blank card, magnetic stripe card, contact smart card, contactless smart card,
pre-printed card and paper card.
Non CR-80 cards may cause defective print results or become stuck or lodged
in the printer requiring service.
Do not use the cards listed below:
- Previously printed cards by other card printers
- Damp cards
- Cards containing foreign particles, such as glass or metal
- Embossed cards
- Cards contaminated with oil, grease or dirt
- Defective cards with damages ,cracks, broken corners, or bends
- Transparent Cards
- Cards with odd shapes that are not CR80 size