User Manual

MORNING GLORY V4
Transparent low/medium gain overdrive that never gets in the way. The
overdrive you’ve always wanted but could never find.
controls
POWER - Uses 9V DC Negative Center. Do not use more than 9V DC. Your warranty will be voided.
43mA consumption.
VOLUME - Controls the output volume.
DRIVE - Controls the amount of drive or gain just
like a tube amp being cranked at high volumes. You
will notice that as you turn up the drive, it also adds
brightness.
TONE - Controls the amount of brightness. Right is
brighter, left is darker.
GAIN TOGGLE - Engages higher gain mode when
flipped up. The LED will turn red to indicate that you
are in the higher gain mode.
BRIGHT CUT SWITCH - Switch on the right side of the
pedal that cuts the highest frequencies in case the
overall tone is too bright.
jacks
INPUT - Lower 1/4” jack on the right side of the pedal. OUTPUT - 1/4” jack on the left side of the pedal.
RED REMOTE JACK - The upper jack on the right side of the pedal is for a JHS “Red Remote” switch.
Using this switch you can toggle between the higher gain mode and the standard mode on the fly.