User Manual

AT+
Andy Timmons’ signature channel drive and boost. British style overdrive and
distortion with a boost that will have your guitar singing like Andy’s!
controls
POWER - Uses 9V to 18V DC Negative Center. This pedal CAN be run at 18V for more headroom and
greater dynamics. Do not use more than 18V DC. Your warranty will be voided. 15mA consumption.
VOLUME - Controls the output volume.
DRIVE - Controls the amount of drive/gain just
like a tube amp being cranked at high volumes.
EQ - High pass filter that naturally brightens or
darkens the overall tone of the pedal. Right is
brighter, left is darker.
AIR - Just like the presence knob on an amp,
this allows you to dial in the perfect amount of
high end for compatibility with any amp. Right is
brighter, left is darker.
BOOST - Controls the volume of the inde-
pendent boost circuit. Right is more, left is less.
TOGGLE - Gives you 25w/50w/100w feel. Up is
25w, down is 50w, and middle is 100w.
jacks
INPUT - 1/4” jack on the right side of the pedal.
OUTPUT - 1/4” jack on the left side of the pedal.
switches
AT BYPASS - Switch on the left side of the pedal.
BOOST BYPASS - Switch on the right side of the
pedal.