User Manual

CONTROLS
VERB - Controls the amount of reverb. Left is less, right is more.
EQ - Controls the overall tone of the reverb. Left is darker, right is brighter.
DECAY - Controls the length of the reverb trail. Left is shorter, right is longer.
PRE-DELAY TOGGLE - Switch up to create a short delay between the time
the reverb starts and the original signal.
JACKS
INPUT - 1/4” jack on the right side of the pedal.
OUTPUT - 1/4” jack on the left side of the pedal.
POWER - Requires 9V DC negative center power and consumes 74mA. Do not
use more than 9V DC. You will void your warranty.
REVERB