Operation Manual

English

Step 10

17. Auto Search has finished.

Data saving......

Step 11

18. Auto Search has finished.

Press CH+/CH- to watch TV.

6.3. Program receive and switch

Program preview

After finished auto search, you can enjoy watching high quality TV programs.

Press OK key, program preview picture display as illustrated.

Press CH+ or CH- key to move the cursor to select channel in the Program list.

Press OK button to confirm.

Input channel number on remote controller

You can input channel number on remote controller to realize desired program. Press OK to confirm.

Nine picture guide

This DVB-T TV set provides Nine Picture Guide function. Press GUIDE key to start the function and press

CH+/CH- or VOL+/VOL- key to move the cursor to select program image.

Press OK button to confirm.

Teletext display

This DVB-T TV set support Teletext Display. Press Teletext key to start the function.

Press CH+/CH- or VOL+/VOL- key or input page number on remote controller to change display pages.

To display Teletext, the program signal must contain teletext data.

Electronic program guide

This digital TV set support Electronic Program Guide (EPG) function. Press EPG key to start the function.

To run EPG, the program signal must contain EPG data.

EPG Time-Table

Press VOL+ key to get into EPG Time Table. You can browse the program guide the day. Press CH+ or CH-

key to move the cursor to choice the program items.

Press EXIT button to exit to previous page.

Program details

While program items list display, press OK key to browse the program details.

Press EXIT key to exit previous page.

Press EXIT key continuously and return to normal playback.

6.4. Program Search Function

Program Search menu

For the first installation of the TV set, it is recommended to perform program search function. So you can

renew the channel list and receive program picture normally.

If program parameters have been renewed, you must run program search function again and renew the

channel list of the TV set.

Manual Search

Under the Installation Menu, press CH+ or CH- key to move the cursor to select Manual Search item.

Press OK key to continue next step.

Manual search can be used to search the existent certain frequency. It is suitable for the professional to operate.