Operation Manual

English
6. MENU OPERATION
6.1. Installation of DVB-T Receiver
Select DVB-T with the ON/OFF Button (3) on the TV or TV/AV (29) on the remote control, to select DTV.
First Time Installation.
(Program table does not exist.)
The system will automatically start the First Time Installation while turn on
TV set. Please set up the installation as illustrated.
The system may not start the First Time Installation at status as
below:
1.The First Time installation has been set before.
2.Program table is not empty.
Cancel First Time installation
If you want to start the First Time Installation again, please do as below:
1. Delete all channels in program list.
2. Set Factory Default at system setting.
Notice
You need to enter PIN number, to delete all program to enter search or start
the first time installation while parental control lock is in ON status. But in
OFF status, need no PIN. After set factory default, the parental lock is set in
OFF status.
Press VOL+/VOL- to move cursor to YES or No . Press OK key to confirm.
YES: Start First Time installation
NO: Cancel First Time installation
Select country (Receiving the local system)
Press VOL+/VOL- on the remote control to select Country at the standard of
the local TV System.
Press CH+ o CH- on the remote control to move the cursor to make
another selection.
Select language menu
Press VOL+/VOL- to select the language of menu.
Press CH+ o CH- to move the cursor to make another selection.
7