Operation Manual

This device is equipped with a detachable control panel.

Operation of this device is not possible, if the control panel is removed.

Removing the control panel (fig. 1)

1. Turn off power.

2. Push the

OPEN button on the control panel, it will come loose.

3. Slide the control panel to the right until it comes off.

4. To protect the control panel against damage, put it in the protective case.

Installing the control panel (fig. 2)

1. Insert the control panel left side first with the pins into the holes.

2. Push the control panel with its right side onto the holder until it locks on with a

click.

3. The device is ready for operation.

Handling the control panel

• Do not expose the control

panel to water or excessive

moisture.

• Do not remove the control

panel while driving.

• Do not place the control

panel in direct sunlight or

areas with excessive

temperatures.

• Do not touch the connector

on the control panel or the

main unit, as this may

result in poor electrical

contact and/or malfunction

of the unit or the control

panel.

• If the connector is dirty,

clean it with a clean and

dry cloth.

• To avoid damaging the control panel and the sliding mechanism, do not push

down on the panel or place any objects on it while opened.

CONTROL PANEL

ENGLISH